John Budgen Motorcycles

Ariel Motorcycle Spare Parts

 Home Parts Contact
 

Index
Air Filters
Battery Carriers
Chaincases/Guards
Clutch
Electrical
Engine Plates
Engine Spares
Exhausts
Footrests/Brake Pedals
Forks
Frames
Gearbox
Handlebars/Levers
Mudguards
Number Plates
Oil Tanks
Petrol Tanks
Saddles
Speedometers
Stands
Toolboxes
Wheels

Engine Spares

500cc Alloy Long Stroke Barrel 500cc Alloy Short Stroke Barrel
500cc Alloy Cylinder Head Single Lobe Cam

 

Part Number Description Price
0740 Head bolt – Iron VH 5.00
0305 Head stud - Alloy VH 1.80
117-53 Head nut - Square Four 4.20
119-49 Oil union – Square Four 5.00
141-38 Rocker feed pipe – sump to rockers 35.00
140A-32 Rocker feed pipe – between r/boxes 29.00
210-23 Manifold dome nut – Square Four 3.50
23-52 Alloy barrel – 500cc – new 525.00
  Alloy barrel – short stroke 500cc  
  Use with 350 crank & 500 head        525.00
1432-35 Main bearing (MRJ1) 29.28
1460-28 Cam bush 6.00
1460-39 Cam bush 7.00
169-54 Head nut - Alloy VH 3.25
1785-29            Cam shim  .005”; .010”; 020; 0.50
330-38/39 Valve lift assy               31.00
335-30 Valve lift Spindle 11.30
338-30 Valve lift arm VB 12.30
338-31 Valve lift arm NH VH 12.30
35-56 Alloy head 500cc – new 625.00
341-38 Valve lift bush 5.00
345-38 Valve lift seal 0.60
348-54 Valve lift lock tab 2.05
350-38 Valve lift cable stop 1.50
  Valves – all models    from 22.00 each
  Valve springs      from 19.00 set
470-33 Valve guide – Inl. 9.50
470-50 Valve guide – Inl. 9.50
491-35 Valve guide – Exh. 9.50
491-50 Valve guide – Exh. 10.00
494-35 Valve guide – exh. 9.00
5187-37  Dome nut – oil return 1.30
560-29 Valve bottom collar NH 7.00
580-34 Halite washer 1.00
5892-52 Oil “T” piece – return pipe 4.50
605-30 Valve top collar NH/VH 9.50
640-32 Split cone NH   3.00 pair
640-30 Split cone VH   3.00 pair
655-38 Valve cap NH 3.00
650-34 Valve cap VH 3.00
0621 Rocker bolt – iron head (long)  1.50
0622 Rocker bolt – iron head (short) 1.50
0626 Rocker bolt – alloy head (long) 1.50
0627 Rocker bolt – alloy heads (short) 1.50
851-54 Tappet inspection plug                      4.00
857-38   Rocker box cap 4.00
852-55 Rocker box lock tab 3.00
904-52 Rocker spring 2.50
940-38 Dome nut (1938-52) 4.00
940-53 Dome nut (1953-59) 4.00
941-37 (38 Spindle screw 6.50
945A-31 Distance collar – rocker spindle 3.50
10311-54 Sump stud 1.30
10414-54 FH small end bush 6.50
1077-33 Purifier 9.00
1080-29 (A6) Big end assy, 180.65
1085-36 (A5) Big end assy.  162.59
1080-37(A7K)  Big end assy. 185.95
10100-54 Small end bush – FH 7.50
1130-33 Small end bush NH 9.00
1130-35 Small end bush VB VH 9.50
1220-29 Shock absorber spring 11.00
1260-30 Spring 15.00
1272-41 Sliding member 10.00
1290-26 Nut 2.00
1299-28 Lock washer 2.50
1351-41 Spring plate 11.00
  Engine sprockets (used)          20.00
0304 Cylinder base stud VH 2.70
0317 Cylinder base stud NH 2.70
0520             Sump plate bolt set (4)             4.20
140-50 Rocker oil pipe c/case to rockers 33.50
140A-52 Rocker feed pipe – VH 29.00
141A-52           Rocker feed pipe – NH 25.60
1432-35 Bearing – drive side  25.60
1440-30 Bearing – drive side 12.00
1433-35            Bearing – timing side 46-15
1475-29 Cam spindle 6.80
1520-29 Filter gauze 12.00
11210 Piston NH  Std; +.020: .040: .060  88.00
10503 Piston VH Std. +.020: .040: .060      104.00
  Piston rings    from 22.00 set
10027/28-54 Head bolt set FH 18.50 set
10215-54 Rocker box bolt set FH   7.50 set
10311-54 Sump plate stud 1.30
1750-54 Camshaft – used NH/VH  50.00
1751-54 Camshaft – HS MKI – re-profiled    221.00
1770-34 ½ time pinion 10.00
1800-51 -1801-51 Cam followers – used 35.00 pair
1800-54 -1801-54 Cam followers HS – re-profiled     89.50 pair
1855-50 Pushrod 11/16” VH 8.00
1903-38 Pushrod tube – stainless – VH 36.00 pair
1905-38 Pushrod tube – stainless – NH 36.00 pair
1920-28 Mag. Chain sprocket – camshaft 10.00 used
1925-28 Mag. Chain sprocket – magneto 35.00.
1930-28 Camshaft sprocket nut 2.00
1932-26 Magneto sprocket nut 2.00
1935-28 Magneto chain 13.00
S2-7L Half time pinion nut LHT 2.50
  Timing cover screws – stainless 17.50. set - stainless
2010-28 Camshaft bush 6.10
2080-29 Quill 6.50
2080-41 Quill 6.00
2085-40 Oil feed nut – use 5187-37 1.30
2090-53 Mag. Oil seal 1.80
2150.41 Oil pump valve plug 3.50
2154-41 Oil pump – valve spring 2.20
2212-50 Oil pump – recond. – exchange 59.50
2218-29 Drive block – oil pump 1.00
2220-29 Oil pump plunger spring 2.20
4434-50 Main bearing (LJ1) 10.58
5187-37 Oil feed nut 1.30
6621-29 Singles pinion extractor 15.50
D–2713 BTH adv/retard plunger assy. 10.00

 

Copyright John Budgen 2011